Search:    
    VAT Mode:

    Q: My Pressure Washer runs at half pressure and gun vibrates at a rate of several times a second?

    A: Pump has lost compression from a cylinder (usually have 3) - could be blockage or seized piston.

    Q:My Pressure Washer Gun or Hose broke. You sell many versions, which version fits my machine?

    A:Manufacturers often fit more than one style of gun to any model. Look at the photos of the gun or hose styles for you brand of machine. The most important issue is often the connection style between the gun and the hose.

    Q: Can i buy parts for my Pressure Washer, Vacuum or Steam Cleaner like switches and pump repair kits?

    A: Use the search facility to find your model or your specific part number. If your machine is found then common spares will be listed. If you can't find what you require, just use the contact form bellow and we will help you.


    more>>
    your shopping with www.sparesgiant.com is protected by COMODO

    Karcher K550M Pressure Washer 12743040

     E-mail this product to a friend


    Karcher K550M Pressure Washer 12743040
     
    How to open the box and fit parts :
    Applies to the karcher k550m k650m kb9050 kb9060
     
    remove handle :
    • one screw at each side at top of wheel
     
    cable reel :
    • un-wind cable
    • remove screw from recess in top of cable drum
    • rotate drum anti-clockwise 5 degrees and pull off
     
    on/off knob :
    • should just pull off
     
    hose reel :
    • un-wind hose press out the retention finger on the face of the reel drum
    • rotate the face clockwise 5 degrees whilst holding the hose drum
    • the drum face should fall away from the drum
    • unscrew the hose
    • you will see 5 retention fingers inside the drum
    • lift each retention finger and the drum will pull off the yellow case
     
    remove yellow case screws :
    • 2 at the back in the nozzle holder recesses
    • 2 at each side visable once reels removed (4 in total)
    Bookmark and Share